Water Repellent & Corrosion Protection Sealer penetrating up to 5 cm

Deep Penetrating Waterproof Sealer for Concrete and Porous Stone against harmful salts

This professional-grade structural concrete sealer combines durability, breathability, infrastructure waterproofing and steel reinforcement protection.

This invisible waterproofing and rebar corrosion protection, penetrates up to 5 cm into the material, delivering long-lasting concrete protection against water infiltration, humidity, harmful salts, and reinforcement corrosion.
Unlike surface coatings, ImperGuard RF works from within to safeguard your structures for over 15 years. Ideal for rebar protection, as a bridge waterproofing chemical, for concrete structure protection, and porous stone. 

Long-lasting concrete protection and stone waterproofing against harmful salts and corrosion

Professional deep penetrating sealer for reinforced concrete, architectural concrete, natural stone, reconstituted stone, terracotta, rendering, and cement structures. This structural concrete waterproofing is a non film forming waterproof coating that allows materials to breathe naturally while acting as a chloride barrier and a carbonation protection.

Corrosion protection & hardener

The formula provides anti dusting treatment, corrosion protection while hardening surfaces. This infrastructure protection sealer protects against chloride penetration, acid rain, freeze thaw cycles, corrosion, moss and lichen growth, and efflorescence.
Works effectively even in high humidity conditions and on slightly damp surfaces. Even effective on surfaces with microcracks up to 0.3 mm, ImperGuard RF arrests alkali-silica reactions and increase concrete durability. Water repellent properties develop within hours and reach optimal efficiency after 14 days.

Penetrating waterproofing technology for new and old structures

This penetrating waterproofing treatment impregnates porous materials to saturation, crystallizing within the structure to provide permanent facade protection. Protects against harmful salts, chlorides, and pollutants carried by water infiltration. The colorless, invisible finish preserves the natural appearance of surfaces while delivering superior water resistance and durability.
UV resistant, frost resistant, and effective on fresh and aged concrete.
ImperGuard RF outperforms conventional surface sealers.
Solvent free and environmentally friendly with VOC < 1 g/L, this water based sealer is safe for interior and exterior applications on walls, facades, roofs, floors, and as concrete bridge protection.

How to use

Impregnate the material to saturation in 1 to 3 coats wet on wet (without letting the first coat dry), depending on porosity and exposure.
Always apply from bottom to top using a low pressure sprayer.
Remove any excess before drying to avoid white marks.
Protected drying: 24 hours. Optimal efficiency reached after 2 to 3 days (up to 14 days for maximum performance).
Can be overcoated with protective coatings or paint after 4 hours to 1 day. Coverage: 100 to 180 g/m per coat (approximately 5 to 10 m per liter depending on porosity).
Do not apply in rain, very hot weather, or strong winds.
Available in 1, 5 L and 25 L containers.

GUARD SPECIALITY PRODUCTS, EXPERT IN MATERIAL CARE IN INDIA SINCE 2009:

Guard offers innovative products to clean, protect and beautify your materials, combining chemistry and the environment. Limestone, marble, granite, slate, tiles, concrete, cement, tiles, bricks, terracotta, Guard helps you care for all your materials.